Past Questions and Answers

 


Do you have log repair knowledge as well? Post your remarks after our answer! Just click VIEW ANSWER now!

Please browse the category questions and answers as a form of your question has likely been asked in the past.  If you can't find your answer, The Log Doctor is here to answer any question you may have regarding the repair and restoration of your log home or cabin.  If you are not a do-it-yourself kind of person, please contact us and put all our knowledge and experience to work for you!

 

Question:


I have black on the logs on the north side of my log home. Is this a mildew or mold, or dry rot? Do I sand it off before restaining my house? Or maybe clorox wash if it's mold? Thank you.

Answer:

NEVER use bleach! You will probably have to sand it off. I'm guessing that it wash power washed before it was stained and not allowed to dry properly.

Add your Feedback to this question

Use the form below to post your comments to this question and answer.

  Name:
  Email:
  Question:
(500 characters max)
   

Posted By sierrason
12/19/2011
Logs treated with boiled linseed oil WILL turn BLACK with Mold and Mildew over time, particularly on the North Exposure where there is a higher level of Moisture and less sun. Cleaning with turpentine or mineral spirits to remove the surface film of linseed oil will remove most of the black. It is important to determine what finish or preservative was originally used prior to removing the black mold or mildew. M1 is a biodegradeable concentrate used for many exterior cleaning applications and it is available at Home Depot. I would suggest reading the instructions and if possible low pressure water with M1 instead of sanding. I hope this is helpful.!!! Good Luck